- Alpha
- Reads ProPresenter directly
Translate your ProPresenter slides for every viewer
Lyrics and scripture on your screens appear in each viewer’s captions, in their language, as easy-to-read cards. The person running the slides changes nothing.
What flows where
Two paths: the words people say, and the words on screen.
- SlidesProPresenterIts network setting is on, so the current slide’s text can be read.
- Operator ConsoleThe Slides tab of your sessionOpen on the computer that runs ProPresenter, in Chrome or Edge.
- TranslateInterScribeWaits until a slide has stayed on screen for the settle time, 2 s by default, then translates it once.
- ViewersEvery phoneThe slide appears in the captions in each viewer’s language. Viewers can always see the original.
The sermon audio takes its own path, from your sound desk. Getting good audio
- Software
- Version 7.9 or later, with Network turned on
- Browser
- Chrome or Edge, on the computer that sends the slides
- Where
- The Operator Console on the presentation computer, or a Slides station on its network
- Plan
- Translated slides are in Beta and not part of any plan yet
Set it up
3 steps, once. Then slides go out by themselves whenever you are live.
Open Settings › Network and turn on Enable Network. Note the port it shows.
Open your session, then the Slides tab, press Choose source › Use this computer, pick ProPresenter, and enter the address and port from step 1.
Press Connect and send slides. The slide on screen goes to your audience; from then on, slides go out by themselves whenever you are live.
While you are live
- Wait before sending
2 s by default. Raise it if the person running slides clicks through verses quickly.
- Send slide pictures
Also send the slide picture, for announcements with graphics.
- Pause this computer
Stop sending during a video or a private moment, without leaving the live session.
- Clear slide
Remove the last card from viewers’ phones, for example after the final song.
Troubleshooting
If something says this, do that.
| What you see | What to do |
|---|---|
| Can't reach ProPresenter. Check the address, that Network is on in ProPresenter, and that you are using Chrome or Edge | Open ProPresenter, turn its network setting on as in step 1, and check the address and port you typed. Use Chrome or Edge. |
| Connecting to ProPresenter… | If this stays on screen, the two computers may be on different networks, such as guest Wi-Fi and the AV network. Put both on the same one. |
| Viewers see a slide a moment late | That is the wait time at work. Lower Wait before sending if your slides stay up long enough. |
Still stuck? Read the Slides guide or talk to a person
What else connects
What else connects
Hear it, then see your price.
Listen to a recorded sample, then price your own sessions.
Price in 1 minute · Nothing charged during the trial · Demo needs no sign-up